By Dr. Rusty Lavender, D.C. — upper cervical chiropractor, Lavender Family Chiropractic, Sarasota, FL. Reviewed and updated October 2026.
In short: Cone beam CT (CBCT) is a three-dimensional X-ray of the top of the neck. At Lavender Family Chiropractic in Sarasota we use it once, at the start of care, to see exactly how the atlas (C1) and axis (C2) sit under the skull in all three planes. That measurement is what the Knee Chest correction is calculated from. This page explains what the scan shows, what it does not, how the radiation compares with other imaging, and why a normal brain MRI does not answer the same question. Call (941) 243-3729.
What a 3D CBCT scan of the upper neck shows
The atlas is a ring of bone that carries the skull. It has no disc above or below it, and it can shift forward or back, tilt to one side, and rotate, all at the same time. A conventional X-ray is a flat shadow, so those three movements collapse into one picture, and a rotation can hide a tilt or the reverse. Cone beam CT captures a volume instead of a shadow. The scanner rotates once around the head and neck, and software reconstructs the bones so they can be viewed from the front, the side, from above, and in any oblique slice we choose.
On that volume we measure the position of the atlas relative to the skull and to the axis below it, the alignment of the joint surfaces, and the shape of the bony canal the brainstem and spinal cord pass through. We also see the things that change our plan: anatomical variations in how the atlas formed, old fractures, degenerative change, and findings that need a physician’s attention before any correction is considered. A 2022 literature review in Dose-Response on CBCT of the craniocervical junction in upper cervical chiropractic practice reported that incidental and abnormal findings at the junction were visualized with superior detail on CBCT compared with plain radiographs.
Normal reference values exist for these measurements. A 2020 study in Surgical and Radiologic Anatomy measured sixteen craniometric parameters on CBCT images of 300 people, establishing reference ranges for the distances used to evaluate the craniovertebral junction, including the lines used to assess basilar invagination and atlantoaxial position. Those are the kinds of landmarks we read against.
Why 3D matters for the correction
The Knee Chest correction is delivered along a line calculated before you are on the table. If the atlas has rotated and tilted, the line has to account for both. Two-dimensional films give us an estimate; the volume gives us the measurement. A correction aimed in the wrong plane does little. One aimed at the true angle, with low force and no twisting of the neck, is what the technique is built around. We take the CBCT once, calculate from it, and then track the nervous system’s response with paraspinal infrared thermography, which involves no radiation, so your exposure is limited to the initial study.
How the radiation compares
This is the question patients ask most, and it deserves real numbers rather than reassurance. Effective dose is measured in microsieverts (µSv). The dose from a cone beam scan depends heavily on the field of view (how much of the head and neck is captured) and on the exposure protocol the machine uses.
| Study | What it measured | Finding |
|---|---|---|
| Ludlow & Ivanovic, 2008 | Eight CBCT units vs a 64-slice medical CT, same phantom | Medium field-of-view CBCT: 69–560 µSv. A similar field on the medical CT: 860 µSv. |
| Pauwels et al., 2012 (SEDENTEXCT project) | Fourteen CBCT scanners, head-and-neck phantom | Effective dose 19–368 µSv across devices and protocols; thyroid and salivary glands among the largest contributors. |
| Ludlow et al., 2015 (meta-analysis) | Twenty published studies plus nine additional units | Adult effective dose 9–560 µSv for medium fields, 46–1,073 µSv for large fields; dose varies more than tenfold by protocol. |
| Dose-Response review, 2022 | CBCT of the craniocervical junction in upper cervical chiropractic practice | Effective dose to the patient for similar imaging protocols was equal to or less than conventional radiographs of the same region. |
For scale, the average person in the United States receives roughly 3,000 µSv a year from natural background radiation. A focused upper cervical CBCT on a modern unit falls in the range of weeks of background exposure, not years, and we take it once. We use a limited field of view centered on the upper neck, we do not repeat the scan to check progress, and children are imaged only when the clinical picture requires it. If you have had recent upper cervical imaging elsewhere, bring it; usable existing images are used instead of new ones.
“My MRI was normal.” Why that does not rule the neck in or out
Many of our patients arrive with a normal brain MRI and a normal cervical MRI, and they are relieved and confused in equal measure. The relief is warranted: MRI is the right test for the brain, the spinal cord, the discs, and the soft tissues, and a clear result means the serious causes a neurologist worries about have been looked for. The confusion comes from assuming that “normal” also means “aligned.” MRI is read for tissue, taken lying down, and reported on the structures the ordering physician asked about. The rotational and lateral position of the atlas under the skull is simply not what the study is for, and a radiologist is not asked to measure it. CBCT is a bone study, and position is exactly what it measures. The two tests answer different questions, which is why a normal MRI and a measurable atlas misalignment are routinely found in the same person. Our guide to how craniocervical instability is diagnosed covers the imaging that applies when ligament laxity, not alignment alone, is the concern.
What the CBCT does not do
It does not image the brain, the spinal cord, the discs, or the ligaments in the way MRI does. It does not tell us how the nervous system is functioning on a given day; thermography does that. It does not replace a physician’s evaluation of a new, severe, or changing headache, of weakness, numbness, or vision change, or of a head or neck injury with red-flag symptoms. When the scan shows something that needs a physician, we send the images and say so plainly. We also share the study with your neurologist, dentist, ENT, or primary care physician on request.
How the scan fits into your first visit in Sarasota
Your first visit begins with a consultation and a history that goes back to the first symptom and every neck injury since, then an examination of the upper neck and nervous system, including paraspinal infrared thermography and functional nervous system scans. If the examination points to the upper neck, we take the CBCT, which takes well under a minute in the scanner. We measure the atlas and axis, calculate the correction, and walk you through the images at a report of findings. The correction itself is low force, with no twisting, cracking, or rotation of the neck. You can read each step on our what to expect page, and the broader approach on our upper cervical chiropractic care page.
Our office is at 5899 Whitfield Avenue, Suite 107, Sarasota, FL 34243, at University Parkway and Whitfield Avenue. Hours are Monday through Thursday 10:00 am to 1:00 pm and 3:00 pm to 6:00 pm, and Friday 9:00 am to 12:00 pm.
Frequently Asked Questions
What does a 3D CBCT X-ray of the upper neck show?
Cone beam CT produces a three-dimensional image of the atlas, axis, and base of the skull. We can see the position of the atlas in every plane, the joint surfaces, the canal the brainstem passes through, and any anatomical variation. That lets us measure the exact direction and degree of misalignment and screen for conditions that would change our approach or require a physician’s referral.
Why does 3D matter for the atlas?
The atlas can shift forward, tilt sideways, and rotate at the same time. A flat X-ray collapses those into one view, so one movement can hide another. CBCT shows all three dimensions, so the Knee Chest correction is calculated at the true angle.
How does the radiation compare with a medical CT?
In the published dosimetry studies above, medium field-of-view cone beam scans measured 69–560 µSv on the same phantom where a 64-slice medical CT measured 860 µSv, and a 2022 review found CBCT of the craniocervical junction delivered a dose equal to or less than conventional radiographs of the same region. We take the scan once at the start of care; ongoing monitoring uses thermography, which has no radiation.
Is CBCT the same as the scan at my dentist?
It is the same technology. Cone beam CT was developed for dental and maxillofacial imaging, which is why most of the dose research comes from that literature. We use a field of view and positioning aimed at the upper cervical spine rather than the teeth.
Will the scan show what my MRI missed?
It shows something your MRI was not asked to measure: the position of the atlas and axis under the skull. It does not show the brain, discs, or soft tissue the way MRI does. The two are complementary, and a normal MRI is good news that does not settle the alignment question.
Does every patient at your Sarasota office need a CBCT scan?
Nearly every new adult patient does, because we will not correct the atlas without seeing its position. The exceptions are patients who bring recent, usable upper cervical imaging and children, where imaging is kept to a minimum. We share images with your physician, neurologist, or dentist on request.
How quickly can I be seen?
We hold time for same-day and next-day new patient visits. See our same-day chiropractor in Sarasota page or call.
Find out whether your upper neck is part of the problem
Call (941) 243-3729 or book online. Lavender Family Chiropractic in Sarasota, Florida offers a thorough upper cervical evaluation to find out whether we can help.